Welcome Message

Hi, welcome to my website. This is a place where you can get all the questions, puzzles, algorithms asked in interviews and their solutions. Feel free to contact me if you have any queries / suggestions and please leave your valuable comments.. Thanks for visiting -Pragya.

December 27, 2009

Little Endian and Big Endian

Little Endian means that the lower order byte of the number is stored in memory at the lowest address, and the higher order byte is stored at the highest address. That is, the little end comes first.

For example, a 4 byte, 32-bit integer


Byte3 Byte2 Byte1 Byte0


will be arranged in memory as follows:


Base_Address+0 Byte0
Base_Address+1 Byte1
Base_Address+2 Byte2
Base_Address+3 Byte3


Intel processors use "Little Endian" byte order.


"Big Endian" means that the higher order byte of the number is stored in memory at the lowest address, and the lower order byte at the highest address. The big end comes first.


Base_Address+0 Byte3
Base_Address+1 Byte2
Base_Address+2 Byte1
Base_Address+3 Byte0


Motorola, Solaris processors use "Big Endian" byte order.

In "Little Endian" form, code which picks up a 1, 2, 4, or longer byte number proceed in the same way for all formats. They first pick up the lowest order byte at offset 0 and proceed from there. Also, because of the 1:1 relationship between address offset and byte number (offset 0 is byte 0), multiple precision mathematic routines are easy to code. In "Big Endian" form, since the high-order byte comes first, the code can test whether the number is positive or negative by looking at the byte at offset zero. Its not required to know how long the number is, nor does the code have to skip over any bytes to find the byte containing the sign information. The numbers are also stored in the order in which they are printed out, so binary to decimal routines are particularly efficient.


Here is some code to determine what is the type of your machine


int num = 1;
if(*(char *)&num == 1)
{
printf("\nLittle-Endian\n");
}
else
{
printf("Big-Endian\n");
}



And here is some code to convert from one Endian to another.



int myreversefunc(int num)
{
int byte0, byte1, byte2, byte3;

byte0 = (num & x000000FF) >> 0 ;
byte1 = (num & x0000FF00) >> 8 ;
byte2 = (num & x00FF0000) >> 16 ;
byte3 = (num & xFF000000) >> 24 ;

return((byte0 << 24) | (byte1 << 16) | (byte2 << 8) | (byte3 << 0));
}

http://vijayinterviewquestions.blogspot.com/2007/07/what-little-endian-and-big-endian-how.html

No comments: